Murakami Pink T9 - Pure Photopolymer Emulsion Gal

EMPKT9G

$71.50 Gal

In Stock
Qty:
Gal
APPLICATIONS

Diazo emulsion for Plastisol, Discharge and Water-based textile ink systems.

PHYSICAL PROPERTIES

Pink colored PVA-SBQ Pure Photopolymer Direct Emulsion
Pre-sensitized for immediate use
Fast exposures, 3-5x faster than diazo based emulsions.
Outstanding resolution and definition properties, reclaim easily.
37% solids content

HANDLING

Handle under yellow safe lights. Avoid exposure to sunlight, flourescent and incandescent lights.

SENSITIZING

Not needed. Ready to use.


MESH PREPARATION

It is important to remove any contamination, residual inks, cleaning chemistry, or general dirt and dust.
Completely dry the screen before coating.

COATING PROCEDURE

Use a clean dry coating trough that has a nick free surface for smooth coating. Apply one or two coats of emulsion to the print side. Rotate the frame 180 degrees and apply one or two coats of emulsion to the squeegee side. • Additional coats may be added to the print side if thicker stencils are required.

DRYING
Dry the coated screen horizontally with the print side down in a clean light safe area. The following will help to ensure complete drying:

• 86° to 104° degrees F (30° to 40° C)
• 30% to 50% relative humidity
• Good air circulation

The use of a screen drying cabinet with heated airflow can help in maintaining these conditions.
Color
Pink
Solids Content (%)
0.44
Reclaimability
Excellent
Pot Life
1 Year
Screen Life
6 months
Waterbased Ink (Textile)
Excellent
Plastisol
Excellent
Discharge
Excellent